Check-Vpn-Next-Hops - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

check-vpn-next-hops

Syntax
Release Information
Description
Mode
352
[ no ] check-vpn-next-hops
Command introduced before JunosE Release 7.1.0.
Enables a BGP speaker to take the reachability of the next hop on received VPNv4 or
VPNv6 routes into account when it determines the best route to a prefix. Checking the
reachability is disabled by default. The no version explicitly disables reachability checking.
Address Family Configuration
Copyright © 2010, Juniper Networks, Inc.