JunosE 11.3.x Command Reference Guide A to M
bundled-group-id-overrides-mlppp-ed
Syntax
Release Information
Description
Mode
344
[ no ] bundled-group-id-overrides-mlppp-ed
Command introduced before JunosE Release 7.1.0.
Specifies that the router uses the bundled group identifier you assigned using the
bundled-group-id command when selecting a tunnel-service module instead of any
endpoint discriminator. The no version removes the override.
NOTE: We strongly recommend that you use this command only with the
support of JTAC.
L2TP Destination Profile Host Configuration
Copyright © 2010, Juniper Networks, Inc.