Show Config - Dell MXL 10GbE Reference Manual

Parameters
session-ID
type rpm |
erpm
Defaults none
Command CONFIGURATION
Modes
Command
Version 9.4(0.0)
History
Version 8.3.16.1
Usage The monitor command is saved in the running configuration at Monitor Session
Information
mode level and can be restored after a chassis reload.
Example
Dell(conf)# monitor session 60
Dell(conf-mon-sess-60)
Related
show monitor session
Command
show running-config monitor session
monitor session.

show config

Display the current monitor session configuration.
Syntax
show config
Defaults none
Command MONITOR SESSION (conf-mon-sess-session-ID)
Modes
Command
Version 8.3.16.1
History
Example
Dell(conf-mon-sess-1)#show config
!
monitor session 1
source TenGigabitEthernet 0/1 destination Port-channel 1
direction rx
1046
Enter a session identification number. The range is from 0 to
65535.
Specifies one of the following type:
• rpm: to create remote port monitoring session.
• erpm: to create encapsulated remote port monitoring
session.
• If no option is specified, by default SPAN will be created.
Added support for rpm / erpm.
Introduced on the M I/O Aggregator.
— displays the monitor session.
— displays the running configuration of a
Introduced on the M I/O Aggregator.
Port Monitoring