Table of Contents
Advertisement
Interface index is 34148609
Internet address is not set
Mode of IP Address Assignment : NONE
DHCP Client-ID :tenG130001ec9f10005
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
Flowcontrol rx off tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 5d5h24m
Queueing strategy: fifo
Input Statistics:
byte pkts
Output Statistics:
byte pkts
Rate info (interval 299 seconds):
rate
rate
Time since last interface status change: 5d5h23m
!-------------output truncated ----------------!
Related
show hardware stack-unit
Commands
output statistics.
show interfaces
interface.
show interfaces status
Display a summary of interface information or specify a stack unit and interface to display status
information for that specific interface only.
Syntax
show interfaces [interface stack-unit unit-number] status
Parameters
interface
588
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
0 packets, 0 bytes, 0 underruns
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
0 Multicasts, 0 Broadcasts, 0 Unicasts
0 throttles, 0 discarded, 0 collisions
Input 00.00 Mbits/sec,
Output 00.00 Mbits/sec,
— displays data plane and management plane input/
— displays information on a specific physical interface or virtual
(OPTIONAL) Enter one of the following keywords and slot/
port or number information:
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
0 packets/sec, 0.00% of line-
0 packets/sec, 0.00% of line-
Interfaces
Advertisement
Table of Contents
