Usage
The following describes the show ip mroute command shown in the following
Information
example.
Field
(S, G)
uptime
Incoming
interface
Outgoing
interface list:
Example
Dell#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
(1.13.1.100, 224.10.10.1), uptime 00:04:03
(*, 224.20.20.1), uptime 00:05:12
show ip rpf
View reverse path forwarding.
Syntax
show ip rpf
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Multicast
Description
Displays the forwarding entry in the multicast route table.
Displays the amount of time the entry has been in the
multicast forwarding table.
Displays the reverse path forwarding (RPF) information
towards the source for (S,G) entries and the RP for (*,G)
entries.
Lists the interfaces that meet one of the following:
•
a directly connected member of the Group
•
statically configured member of the Group
•
received a (*,G) or (S,G) Join message
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/13
Incoming interface: GigabitEthernet 3/4
Outgoing interface list:
GigabitEthernet 3/12
GigabitEthernet 3/13
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/4
EXEC
EXEC Privilege
917