Clock Update-Calendar - Dell MXL 10GbE Reference Manual

clock update-calendar

Set the switch hardware clock based on the software clock.
Syntax
clock update-calendar
Defaults Not configured.
Command EXEC Privilege
Modes
Command
Version 8.3.16.1
History
Usage Use this command only if you are sure that the hardware clock is inaccurate and
Information the software clock is correct. You cannot delete this command (there is not a no
form of this command).
Related calendar set
Commands
debug ntp
Display network time protocol (NTP) transactions and protocol messages for troubleshooting.
Syntax
debug ntp {adjust | all | authentication | events | loopfilter
| packets | select | sync}
To disable debugging of NTP transactions, use the no debug ntp {adjust |
all | authentication | events | loopfilter | packets | select |
sync} command.
Parameters
adjust
all
authentication
events
loopfilter
packets
select
1286
Introduced on the MXL 10/40GbE Switch IO Module.
— sets the hardware clock.
Enter the keyword adjust to display information on NTP
clock adjustments.
Enter the keyword all to display information on all NTP
transactions.
Enter the keyword authentication to display information
on NTP authentication transactions.
Enter the keyword events to display information on NTP
events.
Enter the keyword loopfilter to display information on
NTP local clock frequency.
Enter the keyword packets to display information on NTP
packets.
Enter the keyword select to display information on the NTP
clock selection.
System Time and Date