Debug Isis - Dell MXL 10GbE Reference Manual

debug isis

Enable debugging for all IS-IS operations.
Syntax
debug isis
To disable debugging of IS-IS, use the no debug isis command.
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Usage
Entering debug isis enables all debugging parameters.
Information
To display all debugging information in one output, use this command. To turn off
debugging, you normally enter separate no forms of each command. To disable all
debug messages for IS-IS at once, enter the no debug isis command.
debug isis adj-packets
Enable debugging on adjacency-related activity such as hello packets that are sent and received on IS-IS
adjacencies.
Syntax
debug isis adj-packets [interface]
To turn off debugging, use the no debug isis adj-packets [interface]
command.
Parameters
interface
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
796
Introduced on the MXL 10/40GbE Switch IO Module.
(OPTIONAL) Identifies the interface type slot/port as one of
the following:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from
1 to 4094.
Introduced on the MXL 10/40GbE Switch IO Module.
Intermediate System to Intermediate System (IS-IS)