Table of Contents
Advertisement
show ip ospf database external
Display information on the AS external (type 5) LSAs.
Syntax
show ip ospf process-id database external [link-state-id] [adv-
router ip-address]
Parameters
process-id
link-state-id
adv-router ip-
address
Command
•
Modes
•
Command
Version 8.3.16.1
History
Usage
The following describes the show ip ospf process-id database external
Information
command shown in the following example.
Field
LS Age
Options
LS Type
Link State ID
958
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
(OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
•
the network's IP address for Type 3 LSAs or Type 5 LSAs
•
the router's OSPF router ID for Type 1 LSAs or Type 4
LSAs
•
the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords adv-router and the ip-
address to display only the LSA information about that
router.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the LSA's age.
Displays the optional capabilities available on router. The
following options can be found in this item:
•
TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
•
DC or No DC is displayed depending on whether the
originating router can support OSPF over demand
circuits.
•
E or No E is displayed on whether the originating router
can accept AS External LSAs.
Displays the LSA's type.
Displays the Link State ID.
Open Shortest Path First (OSPFv2 and OSPFv3)
Advertisement
Table of Contents
