Isis Csnp-Interval - Dell MXL 10GbE Reference Manual

isis csnp-interval

Configure the IS-IS complete sequence number PDU (CSNP) interval on an interface.
Syntax
isis csnp-interval seconds [level-1 | level-2]
To return to the default values, use the no isis csnp-interval [seconds]
[level-1 | level-2] command.
Parameters
seconds
level-1
level-2
Defaults seconds = 10; level-1 (if not otherwise specified)
Command INTERFACE
Modes
Command
Version 9.2(0.0)
History
Usage
The default values of this command are typically satisfactory transmission times for
Information
a specific interface on a designated intermediate system. To maintain database
synchronization, the designated routers send CSNPs.
You can configure Level 1 and Level 2 CSNP intervals independently.
isis csnp-interval
Configure the IS-IS complete sequence number PDU (CSNP) interval on an interface.
Syntax
isis csnp-interval seconds [level-1 | level-2]
To return to the default values, use the no isis csnp-interval [seconds]
[level-1 | level-2] command.
Parameters
seconds
level-1
level-2
Intermediate System to Intermediate System (IS-IS)
Interval of transmission time between CSNPs on multi-
access networks for the designated intermediate system. The
range is from 0 to 65535. The default is 10.
(OPTIONAL) Independently configures the interval of time
between transmission of CSNPs for Level 1.
(OPTIONAL) Independently configures the interval of time
between transmission of CSNPs for Level 2.
Introduced on the MXL 10/40GbE Switch IO Module.
Interval of transmission time between CSNPs on multi-
access networks for the designated intermediate system. The
range is from 0 to 65535. The default is 10.
(OPTIONAL) Independently configures the interval of time
between transmission of CSNPs for Level 1.
(OPTIONAL) Independently configures the interval of time
between transmission of CSNPs for Level 2.
811