Table of Contents
Advertisement
Example
Dell#show interfaces port-channel
(EtherScale)
Port-channel 1 is down, line protocol is down
Hardware address is 00:1e:c9:f1:00:05, Current address is
00:1e:c9:f1:00:05
Interface index is 1107755009
Minimum number of links to bring Port-channel up is 1
Internet address is not set
Mode of IP Address Assignment : NONE
DHCP Client-ID :lag1001ec9f10005
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
Members in this channel:
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 03:28:00
Queueing strategy: fifo
Input Statistics:
byte pkts
Output Statistics:
byte pkts
User
The following describes the show interfaces port-channel brief
Information
command shown in the following example.
Field
LAG
Mode
Status
Uptime
Ports
(untitled)
606
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
0 packets, 0 bytes, 0 underruns
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
0 Multicasts, 0 Broadcasts, 0 Unicasts
0 throttles, 0 discarded, 0 collisions
Description
Lists the port channel number.
Lists the mode:
•
L3 — for Layer 3
•
L2 — for Layer 2
Displays the status of the port channel.
•
down — if the port channel is disabled (shutdown)
•
up — if the port channel is enabled (no shutdown)
Displays the age of the port channel in
hours:minutes:seconds.
Lists the interfaces assigned to this port channel.
Displays the status of the physical interfaces (up or down).
•
In Layer 2 port channels, an * (asterisk) indicates which
interface is the primary port of the port channel. The
primary port sends out interface PDU.
Interfaces
Advertisement
Table of Contents
