Ip Router Isis - Dell MXL 10GbE Reference Manual

ip router isis

Configure IS-IS routing processes on an interface and attach an area tag name to the routing process.
Syntax
ip router isis [tag]
To disable IS-IS on an interface, use the no ip router isis [tag] command.
Parameters
tag
Defaults No processes are configured.
Command INTERFACE
Modes
Command
Version 9.2(0.0)
History
Usage To assign a network entity title to enable IS-IS, use the net command.
Information
Related
•
Commands
•
ipv6 router isis
Enable the IPv6 IS-IS routing protocol and specify an IPv6 IS-IS process.
Syntax
ipv6 router isis [tag]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
tag
Defaults Not configured.
Command ROUTER ISIS
Modes
Command
Version 9.2(0.0)
History
Usage
Configure a network entity title (the net command) to specify the area address and
Information
the router system ID.
Intermediate System to Intermediate System (IS-IS)
(OPTIONAL) The tag you specify identifies a specific area
routing process. If you do not specify a tag, a null tag is
assigned.
Introduced on the MXL 10/40GbE Switch IO Module.
net — configures an IS-IS network entity title (NET) for the routing process.
router isis — enables the IS-IS routing protocol.
(OPTIONAL) This parameter is a unique name for a routing
process. A null tag is assumed if the tag option is not
specified. The tag name must be unique for all IP router
processes for a given router.
Introduced on the MXL 10/40GbE Switch IO Module.
809