Show Ip Pim Snooping Neighbor - Dell MXL 10GbE Reference Manual

Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage The following describes the show ip pim snooping interface commands
Information
shown in the following example.
Field
Interface
Ver/Mode
Nbr Count
DR Prio
DR
Example (#2)
Dell#show ip pim snooping interface
Interface Ver Nbr
Vlan 2

show ip pim snooping neighbor

Display information on PIM neighbors learned through PIM-SM snooping.
Syntax
show ip pim snooping neighbor [vlan vlan-id]
Parameters
vlan vlan-id
Command
•
Modes
•
PIM-Sparse Mode (PIM-SM)
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the VLAN interfaces with PIM-SM snooping
enabled.
Displays the PIM version number for each VLAN interface
with PIM-SM snooping enabled:
• v2 = PIM version 2
• S = PIM Sparse mode
Displays the number of neighbors learned through PIM-SM
snooping on the interface.
Displays the Designated Router priority value configured on
the interface (ip pim dr-priority command).
Displays the IP address of the Designated Router for that
interface.
Count
v2 3
(OPTIONAL) Enter a VLAN ID to display information about
PIM neighbors that PIM-SM snooping discovered on a
specified VLAN. The valid VLAN IDs range is from 1 to 4094.
EXEC
EXEC Privilege
DR DR
Prio
1 165.87.32.2
1027