Login Authentication - Dell MXL 10GbE Reference Manual

password
Defaults No password is configured. level = 15.
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage
To control access to command modes, use this command to define a password for
Information
a level and use the privilege level (CONFIGURATION mode) command.
Passwords must meet the following criteria:
•
•
Related
show running-config
Commands
privilege level (CONFIGURATION mode)
modes within the switch.

login authentication

To designate the terminal lines, apply an authentication method list.
Syntax
login authentication {method-list-name | default}
To use the local user/password database for login authentication, use the no
login authentication command.
Parameters
method-list-
name
default
Security
Use this parameter only with a password that you copied
from the show running-config file of another Dell
Networking router.
Enter a text string, up to 32 characters long, as the clear text
password.
Introduced on the MXL 10/40GbE Switch IO Module.
Start with a letter, not a number.
Passwords can have a regular expression as the password. To create a
password with a regular expression in it, use CNTL + v prior to entering regular
expression. For example, to create the password abcd]e, you type "abcd CNTL
v ]e". When the password is created, you do not use the CNTL + v key
combination and enter "abcd]e".
NOTE: The question mark (?) and the tilde (~) are not supported characters.
— views the current configuration.
Enter the keywords method-list-name to specify that
method list, created in the aaa authentication login
command, to be applied to the designated terminal line.
Enter the keyword default to specify that the default
method list, created in the aaa authentication login
command, is applied to the terminal line.
— controls access to the command
1167