Dell MXL 10GbE Reference Manual page 1419

Field
Status
Example
Dell# show npiv devices brief
Total NPIV Devices = 2
---------------------------------------------------------------
----------------------------
ENode-Intf
Fabric-Map
---------------------------------------------------------------
---------------------------
Te 0/12
fid_1003
Te 0/13
fid_1003
Usage
The following table describes the show npiv devices output shown in the
Information
example below.
Field
ENode [number]
Enode MAC
Enode Intf
FCF MAC
Fabric Intf
FCoE VLAN
Fabric Map
Enode WWPN
Enode WWNN
FC Flex IO Modules
Description
FDISC - ENode logged in using a fabric discovery (FDISC).
Operational status of the link between a server CNA port
and a SAN fabric: Logged In - Server has logged in to the
fabric and is able to transmit FCoE traffic.
ENode-WWPN
LoginMethod Status
20:01:00:10:18:f1:94:20
FLOGI LOGGED_IN
10:00:00:00:c9:d9:9c:cb
FDISC LOGGED_IN
Description
A server CNA that has successfully logged in to a fabric over
an M I/O Aggregator and MXL 10/40GbE Switch with the FC
Flex IO module Ethernet port in ENode mode.
MAC address of a server CNA port.
Port number of a server-facing Ethernet port operating in
ENode mode.
Fibre Channel forwarder MAC: MAC address of M I/O
Aggregator and MXL 10/40GbE Switch with the FC Flex IO
module FCF interface.
Fabric-facing Fibre Channel port (slot/port) on which FCoE
traffic is transmitted to the specified fabric.
ID of the dedicated VLAN used to transmit FCoE traffic from
a server CNA to a fabric and configured on both the server-
facing M I/O Aggregator and MXL 10/40GbE Switch with the
FC Flex IO module port and server CNA port.
Name of the FCoE map containing the FCoE/FC
configuration parameters for the server CNA-fabric
connection.
Worldwide port name of the server CNA port.
Worldwide node name of the server CNA.
FCoE-Vlan Fabric-Intf
1003 Fc 0/5
1003 Fc 0/0
1419