Bgp Log-Neighbor-Changes - Dell MXL 10GbE Reference Manual

bgp log-neighbor-changes

Enable logging of BGP neighbor resets.
Syntax
bgp log-neighbor-changes
To disable logging, use the no bgp log-neighbor-changes command.
Defaults Enabled.
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage The bgp log-neighbor-changes command appears in the show config
Information command output.
Related show config
Commands
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems (ASs).
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs does
not have their MEDs compared).
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage
In Non-Deterministic mode, paths are compared in the order in which they arrive.
Information
This method can lead to the system choosing different best paths from a set of
paths, depending on the order in which they are received from the neighbors
because MED may or may not get compared between adjacent paths. In
Deterministic mode (no bgp non-deterministic-med), the system compares
MED between adjacent paths within an AS group because all paths in the AS group
are from the same AS.
When you change the path selection from Deterministic to Non-Deterministic
mode, the path selection for existing paths remains Deterministic until you enter
the capture bgp-pdu max-buffer-size command to clear existing paths.
704
Introduced on the MXL 10/40GbE Switch IO Module.
— views the current configuration.
Introduced on the MXL 10/40GbE Switch IO Module.
IPv6 Border Gateway Protocol (IPv6 BGP)