Advertise Med Voice - Dell MXL 10GbE Reference Manual

show running-config lldp

advertise med voice

To advertise a dedicated IP telephony handset or other appliances supporting interactive voice services,
configure the system.
Syntax
advertise med voice {vlan-id} | {priority-tagged number}
To return to the default, use the no advertise med voice {vlan-id} |
{priority-tagged number} command.
Parameters
vlan-id
priority-tagged
number
Defaults unconfigured.
Command CONFIGURATION (conf-lldp)
Modes
Command
Version 8.3.16.1
History
Related
debug lldp interface
Commands
show lldp neighbors
show running-config lldp
advertise med voice-signaling
To advertise when voice control packets use a separate network policy than voice data, configure the
system.
Syntax
advertise med voice-signaling {vlan-id} | {priority-tagged
number}
To return to the default, use the no advertise med voice-signaling
{vlan-id} | {priority-tagged number} command.
Parameters
vlan-id
priority-tagged
number
880
— displays the LLDP running configuration.
Enter the VLAN ID. The range is from 1 to 4094.
Enter the keywords priority-tagged then the Layer 2
priority. The range is from 0 to 7.
Introduced on the MXL 10/40GbE Switch IO Module.
— debugs LLDP.
— displays the LLDP neighbors.
— displays the LLDP running configuration.
Enter the VLAN ID. The range is from 1 to 4094.
Enter the keywords priority-tagged then the Layer 2
priority. The range is from 0 to 7.
Link Layer Discovery Protocol (LLDP)