Logging Extended - Dell MXL 10GbE Reference Manual

Command
Version 8.3.16.1
History
Related logging console
Commands

logging extended

Logs security and audit events to a system log server.
Syntax
logging extended
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0)
Usage
This command is available with or without RBAC enabled. When RBAC is enabled
Information
you can restrict access to audit and security logs based on the CLI sessions' user
roles. If extended logging is disabled, you can only view system events, regardless
of RBAC user role.
When you enabled RBAC and extended logging:
•
•
•
•
Examples
Dell(conf)#logging extended
Related show logging auditlog
Commands
Simple Network Management Protocol (SNMP) and Syslog
Introduced on the MXL 10/40GbE Switch IO Module.
— sets the logging console parameters.
Introduced on the S4810, S4820T, S6000, Z9000, and MXL.
Only the system administrator role can execute this command.
The system administrator and system security administrator roles can view
security events and system events.
The system administrator role can view audit, security, and system events.
The network administrator and network operator roles can view system events.
— displays audit log, clear logging auditlog— clears audit log
1241