Neighbor Remote-As - Dell MXL 10GbE Reference Manual

neighbor remote-as

Create and specify the remote peer to the BGP neighbor.
Syntax
neighbor {ipv6-address | peer-group-name} remote-as number
To delete a remote AS entry, use the no neighbor {ipv6-address | peer-
group-name} remote-as number command.
Parameters
ipv6-address
peer-group-
name
number
Defaults Not configured.
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Usage If the number parameter is the same as the AS number used in the router bgp
Information
command, the remote AS entry in the neighbor is considered an internal BGP peer
entry.
This command creates a peer and the newly created peer is disabled (shutdown).
Related router bgp
Commands
neighbor remove-private-as
Remove private AS numbers from the AS-PATH of outgoing updates.
Syntax
neighbor {ipv6-address | peer-group-name} remove-private-as
To return to the default, use the no neighbor {ipv6-address | peer-
group-name} remove-private-as command.
Parameters
ipv6-address
732
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter a text string up to 16 characters long as the name of
the peer group.
Enter a number of the AS. The range is from 1 to 65535.
Introduced on the MXL 10/40GbE Switch IO Module.
— enters the ROUTER BGP mode and configure routes in an AS.
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
IPv6 Border Gateway Protocol (IPv6 BGP)