Table of Contents
Advertisement
Command
•
Modes
•
Command
Version 9.2(0.0)
History
ipv6 neighbor
Configure a static entry in the IPv6 neighbor discovery.
Syntax
ipv6 neighbor {ipv6-address} {interface interface}
{hardware_address}
To remove a static IPv6 entry from the IPv6 neighbor discovery, use the no ipv6
neighbor {ipv6-address} {interface interface} command.
Parameters
ipv6-address
interface
interface
Neighbor Discovery Protocol (NDP)
•
For a Fast Ethernet interface, enter the keyword
fastEthernet then the slot/port information.
•
For a Port Channel interface, enter the keywords port-
channel then a number.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
•
For a VLAN, enter the keyword vlan then the VLAN ID.
The range is from 1 to 4094.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the IPv6 address of the neighbor in the x:x:x:x::x
format.
Enter the keyword interface then the interface type and
slot/port or number information:
•
For a Fast Ethernet interface, enter the keyword
fastEthernet then the slot/port information.
•
For a Port Channel interface, enter the keywords port-
channel then a number.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
921
Advertisement
Table of Contents
