Show Iscsi - Dell MXL 10GbE Reference Manual

Version 8.3.16.1
Usage
You can configure up to 16 target TCP ports on the switch in one command or
Information
multiple commands.
When you use the no iscsi target port command and the TCP port you wish
to delete is one bound to a specific IP address, the IP address value must be
included in the command.

show iscsi

Display the currently configured iSCSI settings.
Syntax
show iscsi
Command
•
Modes
•
Command
Version 8.3.16.1
History
Example
Dell#show iscsi
iSCSI is enabled
iSCSI session monitoring is disabled
iSCSI COS : dot1p is 4 no-remark
Session aging time: 10
Maximum number of connections is 256
------------------------------------------------
iSCSI Targets and TCP Ports:
------------------------------------------------
TCP Port Target IP Address
3260
860
Related
•
Commands
•
•
iSCSI Optimization
Introduced on the MXL 10/40GbE Switch IO Module.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
show iscsi sessions — displays information about active iSCSI sessions on the
switch.
show iscsi sessions detailed
sessions on the switch.
show run iscsi — shows run iscsi.
— displays detailed information about active iSCSI
789