Table of Contents
Advertisement
group-address
source-address
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage
The following describes the show ip pim snooping tib commands shown in
Information
the following example.
Field
(S, G)
uptime
expires
RP
flags
Incoming
interface
RPF neighbor
Outgoing
interface list:
PIM-Sparse Mode (PIM-SM)
(OPTIONAL) Enter the group address in dotted decimal
format (A.B.C.D) to display TIB information PIM-SM snooping
discovered for a specified multicast group.
(OPTIONAL) Enter the source address in dotted decimal
format (A.B.C.D) to display TIB information PIM-SM snooping
discovered for a specified multicast source.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the entry in the PIM multicast snooping database.
Displays the amount of time the entry has been in the PIM
multicast route table.
Displays the amount of time until the entry expires and is
removed from the database.
Displays the IP address of the RP/source for this entry.
List the flags to define the entries:
•
S = PIM Sparse Mode
•
C = directly connected
•
L = local to the multicast group
•
P = route was pruned
•
R = the forwarding entry is pointing toward the RP
•
F = Dell Networking OS is registering this entry for a
multicast source
•
T = packets were received via Shortest Tree Path
•
J = first packet from the last hop router is received and
the entry is ready to switch to SPT
•
K=acknowledge pending state
Displays the reverse path forwarding (RPF) interface towards
the RP/ source.
Displays the next hop from this interface towards the RP/
source.
Lists the interfaces that meet one of the following criteria:
•
a directly connect member of the Group
•
statically configured member of the Group
1029
Advertisement
Table of Contents
