Show Qos Qos-Policy-Output - Dell MXL 10GbE Reference Manual

To remove the queue assignment, use the no service-queue queue-id
[class-map class-map-name] [qos-policy qos-policy-name]
command.
Parameters
queue-id
class-map
class-map-
name
qos-policy
qos-policy-
name
Defaults none
Command CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Usage There are four queues per interface on the MXL switch. This command assigns a
Information class map or QoS policy to different queues.
Related
service-policy output
Commands

show qos qos-policy-output

View the output QoS policy details.
Syntax
show qos qos-policy-output [qos-policy-name]
Parameters
qos-policy-
name
Defaults none
Command
•
Modes
•
PMUX Mode of the MXL 10/40GbE Switch I/O Module
Enter the value used to identify a queue. The range is from 0
to 3 (four queues per interface; four queues are reserved for
control traffic).
(OPTIONAL) Enter the keyword class-map then the class
map name assigned to the queue in character format (32
character maximum).
(OPTIONAL) Enter the keywords qos-policy then the QoS
policy name assigned to the queue in text format (32
characters maximum). This specifies the input QoS policy
assigned to the queue under policy-map-input and
output QoS policy under policy-map-output context.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
— applies an output policy map to the selected interface.
Enter the QoS policy name.
EXEC
EXEC Privilege
NOTE: This option is available under policy-map-
input only.
1509