Rate Shape - Dell MXL 10GbE Reference Manual

committed-
rate
burst-KB
peak peak-rate
Defaults Burst size is 100 KB. peak-rate is the same as committed-rate. Granularity for
committed-rate and peak-rate is Mbps unless you use the kbps option.
Command INTERFACE
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Related
rate police
Commands
qos-policy-input

rate shape

Shape the traffic output on the selected interface.
Syntax
rate shape [kbps] rate [burst-KB]
Parameters
kbps
rate
burst-KB
Defaults Granularity for rate is Mbps unless you use the kbps option.
Command QOS-POLICY-OUT
Modes
1092
The range is from 0 to 40000000. The default granularity is
Megabits per second (Mbps).
Enter the bandwidth in Mbps. The range is from 0 to 10000.
(OPTIONAL) Enter the burst size in KB. The range is from 16
to 200000. The default is 100.
(OPTIONAL) Enter the keyword peak then a number to
specify the peak rate in Mbps. The range is from 0 to 10000.
The default is the same as designated for committed-rate.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
— specifies traffic policing on the selected interface.
— creates a QoS output policy.
Enter the keyword kbps to specify the rate limit in Kilobits
per second (Kbps). Make the following value a multiple of 64.
The range is from 0 to 40000000. The default granularity is
Megabits per second (Mbps).
Enter the outgoing rate in multiples of 10 Mbps. The range is
from 10 to 10000.
(OPTIONAL) Enter the burst size in KB. The range is from 0 to
10000. The default is 50.
Quality of Service (QoS)