Dell MXL 10GbE Reference Manual page 1534

Switch i/o module
Table of Contents

Advertisement

traps
informs
version 1 | 2c |
3
auth
noauth
priv
community-
string
udp-port port-
number
notification-
type
1534
(OPTIONAL) Enter the keyword traps to send trap
notifications to the specified host. The default is traps.
(OPTIONAL) Enter the keyword informs to send inform
notifications to the specified host. The default is traps.
(OPTIONAL) Enter the keyword version to specify the
security model then the security model version number 1,
2c, or 3:
Version 1 is the least secure version.
Version 3 is the most secure of the security modes.
Version 2c allows transmission of informs and counter
64, which allows for integers twice the width of what is
normally allowed.
The default is version 1.
(OPTIONAL) Enter the keyword auth to specify
authentication of a packet without encryption.
(OPTIONAL) Enter the keyword noauth to specify no
authentication of a packet.
(OPTIONAL) Enter the keyword priv to specify both
authentication and then scrambling of the packet.
Enter a text string (up to 20 characters long) as the name of
the SNMP community.
NOTE: For version 1 and version 2c security models, this
string represents the name of the SNMP community. The
string can be set using this command; however, Dell
Networking OS recommends setting the community
string using the snmp-server community command
before executing this command. For version 3 security
model, this string is the USM user security name.
(OPTIONAL) Enter the keywords udp-port followed by the
port number of the remote host to use. The range is from 0
to 65535. The default is 162.
(OPTIONAL) Enter one of the following keywords for the
type of trap to be sent to the host:
bgp — Enable BGP state change traps.
ecfm — Enable ECFM state change traps.
entity — Enable entity change traps.
envmon — Enable SNMP environmental monitor traps.
eoam — Enable EOAM state change traps
ets — Enable ets traps
fips — Enable FIP Snooping state change traps
lacp — Enable LACP state change traps.
PMUX Mode of the MXL 10/40GbE Switch I/O Module

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mxl 40gbe

Table of Contents