Clear Dampening - Dell MXL 10GbE Reference Manual

vrrp [vrf
instance]
learning-limit
Defaults Without an interface specified, the command clears all interface counters.
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Example
Dell#clear counters
Clear counters on all interfaces [confirm]
Related
mac learning-limit — allows aging of MACs even though a learning-limit is
Commands
configured or disallow station move on learned MACs.
show interfaces

clear dampening

Clear the dampening counters on all the interfaces or just the specified interface.
Syntax
clear dampening [interface]
Parameters
interface
Defaults Without an interface specified, the command clears all interface dampening
counters.
554
(OPTIONAL) Enter the keyword vrrp to clear the counters of
all VRRP groups. To clear the counters of VRRP groups in a
specified VRF instance, enter the name of the instance (32
characters maximum).
(OPTIONAL) Enter the keywords learning-limit to clear
unknown source address (SA) drop counters when MAC
learning limit is configured on the interface.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
— displays information on the interfaces.
(OPTIONAL) Enter any of the following keywords and slot/
port or number to clear counters from a specified interface:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Interfaces