Clear Lldp Counters - Dell MXL 10GbE Reference Manual

Parameters
system-
capabilities
system-
description
system-name
Defaults none
Command CONFIGURATION (conf-lldp)
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Usage The command options system-capabilities, system-description, and
Information
system-name can be invoked individually or together, in any sequence.

clear lldp counters

Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical interface.
Syntax
clear lldp counters interface
Parameters
interface
Defaults none
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Link Layer Discovery Protocol (LLDP)
Enter the keywords system-capabilities to advertise the
system capabilities TLVs to the LLDP peer.
Enter the keywords system-description to advertise the
system description TLVs to the LLDP peer.
Enter the keywords system-name to advertise the system
name TLVs to the LLDP peer.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
867