Table of Contents
Advertisement
summary
vlt
count
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage
The following describes the show ip mroute command shown in the examples.
Information
Field
(S, G)
uptime
Incoming
interface
Outgoing
interface list:
Example (static)
Dell#show ip mroute static
Mroute: 23.23.23.0/24, interface: Lo 2
Protocol: static, distance: 0, route-map: none, last change:
00:00:23
Example
Dell#show ip mroute snooping
(snooping)
IPv4 Multicast Snooping Table (*, 224.0.0.0), uptime 17:46:23
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/13
1336
Enter a multicast group address and, optionally, a source
multicast address in dotted decimal format (A.B.C.D) to limit
the information displayed to the multicast routes PIM-SM
snooping discovers for a specified multicast group and
source.
(OPTIONAL) Enter the keyword summary to view routes in a
tabular format.
(OPTIONAL) Enter the keyword vlt to view multicast routes
with a spanned incoming interface. Enter a multicast group
address in dotted decimal format (A.B.C.D) to limit the
information displayed to the multicast routes for a specified
multicast group.
Enter the keyword count to display VLT route and packet
data.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the forwarding entry in the multicast route table.
Displays the amount of time the entry has been in the
multicast forwarding table.
Displays the reverse path forwarding (RPF) information
towards the source for (S,G) entries and the RP for (*,G)
entries.
Lists the interfaces that meet one of the following:
•
a directly connected member of the Group
•
statically configured member of the Group
•
received a (*,G) or (S,G) Join message
Virtual Link Trunking (VLT)
Advertisement
Table of Contents
