Show Range - Dell MXL 10GbE Reference Manual

===================================
!-------output truncated -------------------------!
Related
interface
Commands
show ip interface
show interfaces
interface.
show inventory
Networking OS version including hardware identification numbers, and configured
protocols.

show range

Display all interfaces configured using the interface range command.
Syntax
show range
Command INTERFACE RANGE (config-if-range)
Modes
Command
Version 8.3.16.1
History
Example
Dell(conf-if-range-te-0/16)#show range
interface tengigabitethernet 0/16
Dell(conf-if-range-te-0/16)#
Related
interface
Commands
show ip interface
show interfaces
interface.
shutdown
Disable an interface.
Syntax
shutdown
To activate an interface, use the no shutdown command.
Defaults The interface is disabled.
596
— configures a physical interface on the switch.
— displays Layer 3 information about the interfaces.
— displays information on a specific physical interface or virtual
— displays the switch type, components (including media), the Dell
Introduced on the MXL 10/40GbE Switch IO Module.
— configures a physical interface on the switch.
— displays Layer 3 information about the interfaces.
— displays information on a specific physical interface or virtual
Interfaces