Ip Ospf Priority - Dell MXL 10GbE Reference Manual

Defaults Not configured.
Command ROUTER OSPF
Modes
Command
Version 8.3.16.1
History

ip ospf priority

To determine the designated router for the OSPF network, set the priority of the interface.
Syntax
ip ospf priority number
To return to the default setting, use the no ip ospf priority command.
Parameters
number
Defaults 1
Command INTERFACE
Modes
Command
Version 8.3.16.1
History
Usage
Setting a priority of 0 makes the router ineligible for election as a designated router
Information
or backup designated router.
Use this command for interfaces connected to multi-access networks, not point-
to-point networks.
ip ospf retransmit-interval
Set the retransmission time between lost link state advertisements (LSAs) for adjacencies belonging to the
interface.
Syntax
ip ospf retransmit-interval seconds
To return to the default values, use the no ip ospf retransmit-interval
command.
Parameters
seconds
Open Shortest Path First (OSPFv2 and OSPFv3)
Introduced on the MXL 10/40GbE Switch IO Module.
Enter a number as the priority. The range is from 0 to 255.
The default is 1.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the number of seconds as the interval between
retransmission. The range is from 1 to 3600. The default is 5
seconds.
943