Graceful-Restart T3 - Dell MXL 10GbE Reference Manual

graceful-restart t3

Configure the overall wait time before graceful restart completes.
Syntax
graceful-restart t3 {adjacency | manual} seconds
To return to the default, use the no graceful-restart t3 command.
Parameters
adjacency
manual
Defaults manual, 30 seconds
Command ROUTER ISIS
Modes
Command
Version 9.2(0.0)
History
Usage
The running router sets the remaining time value to the current adjacency hold
Information
time. You can override this setting by implementing this command.
Override the default restart-wait time by entering the no graceful-restart
restart-wait command. When you disable restart-wait, the current
adjacency hold time is used.
Set the t3 timer to adjacency on the restarting router when implementing this
command. The restarting router gets the remaining time value from its peer and
adjusts its T3 value so only when you have configured graceful-restart t3
adjacency.
Related graceful-restart restart-wait
Commands before a restarting peer comes up.
graceful-restart restart-wait
Enable the graceful restart maximum wait time before a restarting peer comes up.
Syntax
graceful-restart restart-wait seconds
To return to the default, use the no graceful-restart restart-wait
command.
806
Enter the keyword adjacency so that the restarting router
receives the remaining time value from its peer and adjusts
its T3 value so if you have configured this option.
Enter the keyword manual to specify a time value that the
restarting router uses. The range is from 50 to 120 seconds.
The default is 30 seconds.
Introduced on the MXL 10/40GbE Switch IO Module.
— enables the graceful restart maximum wait time
NOTE: Set the t3 timer to adjacency on the restarting router when
implementing this command.
Intermediate System to Intermediate System (IS-IS)