Stack-Unit Priority - Dell MXL 10GbE Reference Manual

Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Related
•
Commands
•
•

stack-unit priority

Configure the ability of an MXL 10/40GbE switch to become the management unit of a stack.
Syntax
stack-unit 0–5 priority 1-14
Parameters
0–5
1–14
Defaults 0
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Related
•
Commands
•
Stacking
Introduced on the MXL 10/40GbE Switch IO Module.
reload — reboots the system.
show system — displays the current status of all stack members or a specific
member.
show system stack-unit stack-group
configured for a MXL 10/40GbE switch stack unit
Enter the stack member unit identifier, from 0 to 5, of the
switch on which you want to set the management priority.
This preference parameter allows you to specify the
management priority of one backup switch over another,
with 1 the lowest priority and 14 the highest.
The switch with the highest priority value will be chosen to
become the management unit.
Introduced on the MXL 10/40GbE Switch IO Module.
reload — reboots the system.
show system — displays the status of all stack members or a specific member.
displays the stack-groups present/
1261