Test Cam-Usage - Dell MXL 10GbE Reference Manual

Command
Version 8.3.16.1
History
Example
Dell#show qos wred-profile
Wred-profile-name min-threshold max-threshold
wred_drop
wred_ge_y
wred_ge_g
wred_teng_y
wred_teng_g
WRED1

test cam-usage

Check the Input Policy Map configuration for the CAM usage.
Syntax
test cam-usage service-policy input policy-map stack-unit
{[number | [all]}
Parameters
policy-map
stack-unit
number
stack-unit all
Defaults none
Command EXEC
Modes
Command
Version 8.3.16.1
History
Usage
This feature allows you to determine if the CAM has enough space available before
Information
applying the configuration on an interface.
An input policy map with both Trust and Class-map configuration, the Class-map
rules are ignored and only the Trust rule is programmed in the CAM. In such an
instance, the Estimated CAM output column contains the size of the CAM space
required for the Trust rule and not the Class-map rule.
The following describes the text cam-usage service-policy input
policy-map linecard command shown in the following example.
Field
stack-unit
Portpipe
1102
Introduced on THE MXL 10/40GbE Switch IO Module.
0 0
1024 2048
2048 4096
4096 8192
8192 16384
2000 7000
Enter the policy map name.
(OPTIONAL) Enter the keywords stack-unit then the
stack-unit number.
(OPTIONAL) Enter the keywords stack-unit all all to
indicate all the stack-units.
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Indicates the line card slot number.
Indicates the portpipe number.
Quality of Service (QoS)