Syntax Help - Dell MXL 10GbE Reference Manual

Management ethernet Port Configuration: 100M
Management ethernet Port Configuration: full duplex
BOOT_USER #

syntax help

Show the syntax information.
Syntax
help
Command uBoot
Modes
Command
Version 8.3.16.1
History
Example
BOOT_USER # help
***** Dell Force10 Boot Interface Help Information *****
Current access level: USER LEVEL
Use "syntax help" for more information on syntax.
Available command list (22 commands total):
-(36%)-Use <CR> to continue, q to stop:
BOOT_USER #
1312
Introduced on the MXL 10/40GbE Switch IO Module.
boot change [primary|secondary|default]
change operating system boot parameters
boot selection [a|b]
change the rom bootstrap bootflash partition
boot show net config retries
show number of retries for network boot config failure
boot write net config retries <int>
write number of retries for network boot config failure
boot zero [primary|secondary|default]
zero operating system boot parameters
default-gateway <ip-address>
default-gateway - set the default gateway ip address
enable [user|admin]
change access privilege level
help
display help menu
u-Boot