Rmon Collection History - Dell MXL 10GbE Reference Manual

variable
interval
delta
absolute
rising-
threshold value
event-number
falling-
threshold value
event-number
owner string
Defaults owner
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History

rmon collection history

Enable the RMON MIB history group of statistics collection on an interface.
Syntax
rmon collection history {controlEntry integer} [owner name]
[buckets number] [interval seconds]
Remote Monitoring (RMON)
Enter the MIB object to monitor. The variable must be in the
SNMP OID format; for example, 1.3.6.1.2.1.1.3. The object
type must be a 32-bit integer.
Time, in seconds, the alarm monitors the MIB variables; this
is the alarmSampleType in the RMON alarm table. The range
is from 5 to 3600 seconds.
Enter the keyword delta to test the change between MIB
variables. This is the alarmSampleType in the RMON alarm
table.
Enter the keyword absolute to test each MIB variable
directly. This is the alarmSampleType in the RMON alarm
table.
Enter the keywords rising-threshold then the value (32
bit) the rising-threshold alarm is either triggered or reset.
Then enter the event-number to trigger when the rising
threshold exceeds its limit. This value is the same as the
alarmRisingEventIndex or alarmTable of the RMON MIB. If
there is no corresponding rising-threshold event, the value is
zero.
Enter the keywords falling-threshold then the value (32
bit) the falling-threshold alarm is either triggered or reset.
Then enter the event-number to trigger when the falling
threshold exceeds its limit. This value is the same as the
alarmFallingEventIndex or the alarmTable of the RMON MIB.
If there is no corresponding falling-threshold event, the value
is zero.
(OPTIONAL) Enter the keyword owner then the owner name
to specify an owner for the alarm. This is the alarmOwner
object in the alarmTable of the RMON MIB.
Introduced on the MXL 10/40GbE Switch IO Module.
1131