Access-Class - Dell MXL 10GbE Reference Manual

After configuring the aaa authentication login command, configure the
login authentication command to enable the authentication scheme on
terminal lines.
Connections to the SSH server work with the following login mechanisms: local,
radius, and tacacs.
Related
login authentication
Commands
password
radius-server host
tacacs-server host

access-class

Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
Syntax
access-class access-list-name
To delete a setting, use the no access-class command.
Parameters
access-list-
name
Defaults Not configured.
Command LINE
Modes
Command
Version 8.3.16.1
History
Related
line
Commands
ip access-list standard
the IP address.
ip access-list extended
IP addresses or protocols.
1164
NOTE: If authentication fails using the primary method, the system employs
the second method (or third method, if necessary) automatically. For example,
if the TACACS+ server is reachable, but the server key is invalid, the system
proceeds to the next authentication method. The TACACS+ is incorrect, but
the user is still authenticated by the secondary method.
— enables AAA login authentication on the terminal lines.
— creates a password.
— specifies a RADIUS server host.
— specifies a TACACS+ server host.
Enter the name of an established IP Standard ACL.
Introduced on the MXL 10/40GbE Switch IO Module.
— applies an authentication method list to the designated terminal lines.
— names (or selects) a standard access list to filter based on
— names (or selects) an extended access list based on the
Security