Table of Contents
Advertisement
Command
EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
clear ip bgp peer-group
Reset a peer-group's BGP sessions.
Syntax
clear ip bgp peer-group peer-group-name
Parameters
peer-group-
name
Command
EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
clear ip bgp ipv6 dampening
Clear information on route dampening and return suppressed route to active state.
Syntax
clear ip bgp ipv6 unicast dampening [ipv6-address]
Parameters
ipv6-address
Command
EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Usage
After you enter this command, the software deletes the history routes and returns
Information
the suppressed routes to the active state.
IPv6 Border Gateway Protocol (IPv6 BGP)
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the peer group name to reset the BGP sessions within
that peer group.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the IPv6 address in the x:x:x:x::x format then the prefix
length in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Introduced on the MXL 10/40GbE Switch IO Module.
711
Advertisement
Table of Contents
