Show Qos Priority-Groups - Dell MXL 10GbE Reference Manual

Example
Dell# show qos dcb-output
dcb-output ets

show qos priority-groups

Displays the ETS priority groups configured on the switch, including the 802.1p priority classes and ID of
each group.
Syntax
show qos priority-groups
Command EXEC Privilege
Modes
Command
Version 9.3.0.0
History
Example
Dell#show qos priority-groups
priority-group ipc
show stack-unit stack-ports ets details
Displays the ETS configuration applied to egress traffic on stacked ports, including ETS Operational mode
on each unit and the configurated priority groups with dot1p priorities, bandwidth allocation, and
scheduler type.
Syntax
show stack-unit {all | stack-unit} stack-ports {all | port-
number} ets details
Parameters
stack-unit
port-number
Command CONFIGURATION
Modes
Command
Version 9.3.0.0
History
Example
Dell(conf)# show stack-unit all stack-ports all ets details
Stack unit 0 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority#
1394
priority-group san qos-policy san
priority-group ipc qos-policy ipc
priority-group lan qos-policy lan
Introduced on the FC Flex IO module installed in the M I/O
Aggregator and MXL 10/40GbE Switch.
priority-list 4
set-pgid 2
Enter the stack unit identification.
Enter the port number.
Introduced on the FC Flex IO module installed in the M I/O
Aggregator and MXL 10/40GbE Switch.
Bandwidth TSA
FC Flex IO Modules