Ipv6 Nd Dns-Server - Dell MXL 10GbE Reference Manual

Command
Version 9.2(0.0)
History

ipv6 nd dns-server

Configures Recursive DNS Server (RDNSS) addresses to be distributed via IPv6 router advertisements to
an IPv6 device.
Syntax
ipv6 nd dns-server {ipv6-RDNSS-address} {lifetime | infinite}
To remove the IPv6 RDSS configuration, use no ipv6 nd dns-server {ipv6-
RDNSS-address} {lifetime | infinite}
Parameters
ipv6-RDNSS-
address
lifetime
infinite
Defaults Not Configured
Command INTERFACE CONFIG
Modes
Command
Version 9.5(0.0)
History
Usage Use this command to add, edit, or delete an IPv6 RDNSS address and lifetime value.
Information You can configure up to four IPv6 RDNSS addresses. You must specify a lifetime
using the lifetime or infinite parameter.
Example Dell(conf-if-te-0/1)#ipv6 nd dns-server 1000::1 1
IPv6 Basics
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the IPv6 Recursive DNS Server's (RDNSS) address. You
can specify up to 4 IPv6 RDNSS server addresses.
Enter the lifetime in seconds. The amount of time the IPv6
host can use the IPv6 RDNSS address for name resolution.
The range is 0 to 4294967295 seconds. When you specify
the maximum lifetime value of 4294967295 or infinite,
the lifetime does not expire. A value of 0 indicates to the host
that the RDNSS address should not be used. You must
specify a lifetime using the lifetime or infinite
parameter.
Enter the keyword infinite to specify that the RDNSS
lifetime does not expire.
Added support for roles on the Z9000.
Added support for roles on the S6000.
Added support for roles on the S4820T.
Added support for roles on the S4810.
Added support for roles on the MXL.
679