Uplink-State-Group - Dell MXL 10GbE Reference Manual

Command
Version 8.3.16.1
History
Example
Dell# show uplink-state-group
Uplink State Group: 1 Status: Enabled, Up
Uplink State Group: 3 Status: Enabled, Up
Uplink State Group: 5 Status: Enabled, Down
Uplink State Group: 6 Status: Enabled, Up
Uplink State Group: 7 Status: Enabled, Up
Uplink State Group: 16 Status: Disabled, Up
Dell# show uplink-state-group 16
Uplink State Group: 16 Status: Disabled, Up
Dell#show uplink-state-group detail
(Up): Interface up (Dwn): Interface down (Dis): Interface
disabled
Uplink State Group
Upstream Interfaces
Downstream Interfaces
Uplink State Group
Upstream Interfaces
Downstream Interfaces
Te 13/5(Up) Te 13/6(Up)
Uplink State Group
Upstream Interfaces
Downstream Interfaces
13/11(Dis) Te 13/12(Dis) Te 13/13(Dis) Te 13/14(Dis) Te
13/15(Dis)
Uplink State Group
Upstream Interfaces
Downstream Interfaces
Uplink State Group
Upstream Interfaces
Downstream Interfaces
Uplink State Group
Upstream Interfaces
Downstream Interfaces
Related
•
Commands
•

uplink-state-group

Create an uplink-state group and enable the tracking of upstream links on a switch/ router.
Syntax
uplink-state-group group-id
Uplink Failure Detection (UFD)
Introduced on the MXL 10/40GbE Switch IO Module.
show running-config uplink-state-group
of one or more uplink-state groups.
uplink-state-group — create an uplink-state group and enables the tracking of
upstream links.
: 1 Status: Enabled, Up
:
:
: 3 Status: Enabled, Up
: Gi 0/46(Up) Gi 0/47(Up)
: Te 13/0(Up) Te 13/1(Up) Te 13/3(Up)
: 5 Status: Enabled, Down
: Gi 0/0(Dwn) Gi 0/3(Dwn) Gi 0/5(Dwn)
: Te 13/2(Dis) Te 13/4(Dis) Te
: 6 Status: Enabled, Up
:
:
: 7 Status: Enabled, Up
:
:
: 16 Status: Disabled, Up
: Gi 0/41(Dwn) Po 8(Dwn)
: Gi 0/40(Dwn)
— displays the current configuration
1319