Show Stack-Unit Stack-Ports Pfc Details - Dell MXL 10GbE Reference Manual

Command CONFIGURATION
Modes
Command
Version 9.2(0.0)
History
Version 8.3.16.1
Example
Dell(conf)# show stack-unit all stack-ports all ets details
Stack unit 0 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority#
------------------------------------------------
0
1
2
3
4
5
6
7
8
Stack unit 1 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority#
------------------------------------------------
0
1
2
3
4
5
6
7
8

show stack-unit stack-ports pfc details

Displays the PFC configuration applied to ingress traffic on stacked ports, including PFC Operational
mode on each unit with the configured priorities, link delay, and number of pause packets sent and
received.
Syntax
show stack-unit {all | stack-unit} stack-ports {all | port-
number} pfc details
PMUX Mode of the MXL 10/40GbE Switch I/O Module
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the MXL 10/40GbE Switch IO Module.
Bandwidth TSA
0,1,2,3,4,5,6,7 100%
- -
- -
- -
- -
- -
- -
- -
- -
Bandwidth TSA
0,1,2,3,4,5,6,7 100%
-
-
-
-
-
-
-
-
ETS
ETS
-
-
-
-
-
-
-
-
1455