Redistribute - Dell MXL 10GbE Reference Manual

Switch i/o module
Table of Contents

Advertisement

Defaults
Not configured.
Command
ROUTER RIP
Modes
Command
Version 8.3.16.1
History
Usage
Although the passive interface does not send or receive routing updates, the
Information
network on that interface still includes in RIP updates sent using other interfaces.
Related
neighbor
Commands
network

redistribute

Redistribute information from other routing instances.
Syntax
redistribute {connected | static}
To disable redistribution, use the no redistribute {connected | static}
command.
Parameters
connected
static
Defaults
Not configured.
Command
ROUTER RIP
Modes
Command
Version 8.3.16.1
History
Usage
To redistribute the default route (0.0.0.0/0), configure the default-information
Information
originate command.
Related
default-information originate
Commands
1124
Introduced on the MXL 10/40GbE Switch IO Module.
— enables RIP for a specified network.
— defines a neighbor.
Enter the keyword connected to specify that information
from active routes on interfaces is redistributed.
Enter the keyword static to specify that information from
static routes is redistributed.
Introduced on the MXL 10/40GbE Switch IO Module.
— generates a default route for RIP traffic.
Routing Information Protocol (RIP)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mxl 40gbe

Table of Contents