Spanning-Tree - Dell MXL 10GbE Reference Manual

BPDU (MRecords): sent 21, received 9
The port is not in the Edge port mode
Usage The following describes the show spanning-tree msti 5 guard command
Information
shown in the following example.
Field
Interface Name
Instance
Sts
Guard Type
Example
Dell#show spanning-tree msti 0 guard
(Guard)
Executing IEEE compatible Spanning Tree Protocol
Bpdu filter disabled globally
Interface
Name
--------- -------- --------- ---------- -----------
Te 0/41
Te 0/42
Te 0/43

spanning-tree

Enable the multiple spanning tree protocol on the interface.
Syntax
spanning-tree
To disable the multiple spanning tree protocol on the interface, use the no
spanning-tree command.
Parameters
spanning-tree
Defaults Enable.
Command INTERFACE
Modes
Command
Version 8.3.16.1
History
908
Description
MSTP interface.
MSTP instance.
Port state: root-inconsistent (INCON Root), forwarding
(FWD), listening (LIS), blocking (BLK), or shut down (EDS
Shut).
Type of STP guard configured (Root, Loop, or BPDU guard).
Instance Sts Guard type Bpdu Filter
0 FWD None
0 FWD None
0 FWD None
Enter the keywords spanning-tree to enable the MSTP on
the interface.
Introduced on the MXL 10/40GbE Switch IO Module.
No
No
No
Multiple Spanning Tree Protocol (MSTP)