Neighbor Activate - Dell MXL 10GbE Reference Manual

Parameters
ebgp
ibgp
number
Defaults 1
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version 9.2(0.0)
History
Usage If you enable this command, use the capture bgp-pdu max-buffer-size
Information
command to recompute the best path.

neighbor activate

This command allows the specified neighbor/peer group to be enabled for the current AFI/SAFI.
Syntax
neighbor {ipv6-address | peer-group-name} activate
To disable, use the no neighbor {ipv6-address | peer-group-name}
activate command.
Parameters
ipv6-address
peer-group-
name
activate
Defaults Disabled.
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version 9.2(0.0)
History
IPv6 Border Gateway Protocol (IPv6 BGP)
Enter the keyword ebgp to enable multipath support for
External BGP routes.
Enter the keyword ibgp to enable multipath support for
Internal BGP routes.
Enter a number as the maximum number of parallel paths.
The range is from 1 to 16. The default is 1.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Identify a peer group by name.
Enter the keyword activate to enable the identified
neighbor or peer group in the new AFI/SAFI.
Introduced on the MXL 10/40GbE Switch IO Module.
721