Enable Restricted - Dell MXL 10GbE Reference Manual

enable restricted

Allows Dell Networking technical support to access restricted commands.
Syntax
enable restricted [encryption-type] password
To disallow access to restricted commands, use the no enable restricted
command.
Parameters
encryption-
type
password
Defaults Not configured.
Command
Version 8.3.16.1
History
Usage Only Dell Networking Technical Support staff use this command.
Information
enable secret
Change the password for the enable command.
Syntax
enable secret [level level] [encryption-type] password
To delete a password, use the no enable secret [encryption-type]
password [level level] command.
Parameters
level level
encryption-
type
1166
(OPTIONAL) Enter the number 7 as the encryption type.
Enter 7 followed a text string as the hidden password. The
text string must be a password that was already encrypted by
a Dell Networking router.
Use this parameter only with a password that you copied
from the show running-config file of another Dell
Networking router.
Enter a text string, up to 32 characters long, as the clear text
password.
Introduced on the MXL 10/40GbE Switch IO Module.
(OPTIONAL) Enter the keyword level then a number as the
level of access. The range is from 1 to 15.
(OPTIONAL) Enter the number 5 or 0 as the encryption type.
Enter a 5 then a text string as the hidden password. The text
string must be a password that was already encrypted by a
Dell Networking router.
Security