Redistribute - Dell MXL 10GbE Reference Manual

Defaults Not configured.
Command ROUTER ISIS
Modes
Command
Version 9.2(0.0)
History
Usage Although the passive interface does not send nor receive routing updates, the
Information network on that interface is still included in the IS-IS updates sent using other
interfaces.

redistribute

Redistribute routes from one routing domain to another routing domain.
Syntax
redistribute {static | connected | rip} [level-1 | level-1-2 |
level-2] [metric metric-value] [metric-type {external |
internal}] [route-map map-name]
To end redistribution or disable any of the specified keywords, use the no
redistribute {static | connected | rip} [metric metric-value]
[metric-type {external | internal}] [level-1 | level-1-2 |
level-2] [route-map map-name] command.
Parameters
connected
rip
static
metric metric-
value
metric-type
{external |
internal}
level-1
level-1-2
level-2
824
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the keyword connected to redistribute active routes
into IS-IS.
Enter the keyword rip to redistribute RIP routes into IS-IS.
Enter the keyword static to redistribute user-configured
routes into IS-IS.
(OPTIONAL) Assign a value to the redistributed route. The
range is from 0 to 16777215. The default is 0. Use a value that
is consistent with the destination protocol.
(OPTIONAL) The external link type associated with the
default route advertised into a routing domain. Specify one
of the following:
•
external
•
internal
(OPTIONAL) Routes are independently redistributed into IS-
IS as Level 1 routes.
(OPTIONAL) Routes are independently redistributed into IS-
IS as Level-1-2 routes.
(OPTIONAL) Routes are independently redistributed into IS-
IS as Level 2 routes. This setting is the default.
Intermediate System to Intermediate System (IS-IS)