Table of Contents
Advertisement
show config
Display the current configuration for the mode. Only non-default values display.
Syntax
show config
Command
SPANNING TREE
Modes
Command
Version 8.3.16.1
History
Example
Dell(config-stp)#show config
protocol spanning-tree 0
Dell(config-stp)#
show spanning-tree 0
Display the spanning tree group configuration and status of interfaces in the spanning tree group.
Syntax
show spanning-tree 0 [active | brief | guard | interface
interface | root | summary]
Parameters
0
active
brief
guard
interface
interface
root
summary
Spanning Tree Protocol (STP)
Introduced on the MXL 10/40GbE Switch IO Module.
no disable
Enter 0 (zero) to display information about that specific
spanning tree group.
(OPTIONAL) Enter the keyword active to display only active
interfaces in spanning tree group 0.
(OPTIONAL) Enter the keyword brief to display a synopsis
of the spanning tree group configuration information.
(OPTIONAL) Enter the keyword guard to display the type of
guard enabled on an STP interface and the current port state.
(OPTIONAL) Enter the keyword interface and the type
slot/port of the interface you want displayed. Type slot/port
options are the following:
•
For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
•
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
(OPTIONAL) Enter the keyword root to display configuration
information on the spanning tree group root.
(OPTIONAL) Enter the keyword summary to only the number
of ports in the spanning tree group and their state.
1275
Advertisement
Table of Contents
