Neighbor Peer-Group (Creating Group) - Dell MXL 10GbE Reference Manual

Command
Version 9.2(0.0)
History
Usage
You can assign up to 64 peers to one peer group.
Information
When you add a peer to a peer group, it inherits all the peer group's configured
parameters. A peer cannot become part of a peer group if any of the following
commands are configured on the peer:
•
•
•
•
•
•
•
A neighbor may keep its configuration after it was added to a peer group if the
neighbor's configuration is more specific than the peer group's and the neighbor's
configuration does not affect outgoing updates.
A peer group must exist before you add a peer to it. If the peer group is disabled
(shutdown) the peers within the group are also disabled (shutdown).
Related
capture bgp-pdu max-buffer-size
Commands

neighbor peer-group (creating group)

show ip bgp ipv6 unicast peer-group
show ip bgp ipv6 unicast neighbors
neighbor peer-group (creating group)
Allows you to create a peer group and assign it a name.
Syntax
neighbor peer-group-name peer-group
To delete a peer group, use the no neighbor peer-group-name peer-group
command.
Parameters
peer-group-
name
Defaults Not configured.
730
Introduced on the MXL 10/40GbE Switch IO Module.
neighbor advertisement-interval
neighbor distribute-list
neighbor filter-list
neighbor next-hop-self
neighbor route-map
neighbor route-reflector-client
neighbor send-community
Enter a text string up to 16 characters long as the name of
the peer group.
— resets BGP sessions.
— creates a peer group.
— views BGP peers.
— views BGP neighbors configurations.
IPv6 Border Gateway Protocol (IPv6 BGP)