Ip Ssh Connection-Rate-Limit - Dell MXL 10GbE Reference Manual

ip ssh connection-rate-limit

Configure the maximum number of incoming SSH connections per minute.
Syntax
ip ssh connection-rate-limit 1-10
Parameters
1-10
Defaults 10 per minute
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
ip ssh hostbased-authentication
Enable hostbased-authentication for the SSHv2 server.
Syntax
ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the no ip ssh
hostbased-authentication enable command.
Parameters
enable
Defaults Disabled.
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Usage
If you enable this command, clients can log in without a password prompt. This
Information
command provides two levels of authentication:
•
•
1186
Enter the number of maximum numbers of incoming SSH
connections allowed per minute. The range is from 1 to 10
per minute. The default is 10 per minute.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the keyword enable to enable hostbased-
authentication for SSHv2 server.
Introduced on the MXL 10/40GbE Switch IO Module.
rhost-authentication is done with the file specified in the ip ssh rhostfile
command.
checking client host-keys is done with the file specified in the ip ssh pub-
key-file command.
NOTE: Administrators must specify the two files (rhosts and pub-key-file)
to configure host-based authentication.
Security