Neighbor Default-Originate - Dell MXL 10GbE Reference Manual

Parameters
ip-address
peer-group-
name
number
Defaults Not configured.
Command ROUTER BGP
Modes
Command
Version 9.2(0.0)
History
Related bgp four-octet-as-support
Commands

neighbor default-originate

Inject the default route to a BGP peer or neighbor.
Syntax
neighbor {ipv6-address | peer-group-name} default-originate
[route-map map-name]
To remove a default route, use the no neighbor {ipv6-address | peer-
group-name} default-originate [route-map map-name] command.
Parameters
ipv6-address
peer-group-
name
route-map
map-name
Defaults Not configured.
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version 9.2(0.0)
History
IPv6 Border Gateway Protocol (IPv6 BGP)
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter a number of times to allow this neighbor ID to use the
AS path. The range is from 1 to 10.
Introduced on the MXL 10/40GbE Switch IO Module.
— enables 4-Byte support for the BGP process.
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group to set the default route of
all routers in that peer group.
(OPTIONAL) Enter the keywords route-map then the name
of a configured route map.
Introduced on the MXL 10/40GbE Switch IO Module.
723