Show Ip Bgp Ipv6 Unicast Summary - Dell MXL 10GbE Reference Manual

Command
Version 9.2(0.0)
History
Related
neighbor peer-group (assigning peers)
Commands
neighbor peer-group (creating group)

show ip bgp ipv6 unicast summary

Allows you to view the status of all BGP connections.
Syntax
show ip bgp ipv6 unicast summary
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage The following describes the show ip bgp ipv6 unicast summary command
Information
shown in the Example below.
Field
BGP router
identifier
BGP table version
network entries
BGP path attribute
entries
BGP AS-PATH
entries
BGP community
entries
Dampening
enabled
Neighbor
IPv6 Border Gateway Protocol (IPv6 BGP)
Introduced on the MXL 10/40GbE Switch IO Module.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the local router ID and the AS number.
Displays the BGP table version and the main routing table
version.
Displays the number of network entries, route paths, and
the amount of memory used to process those entries.
Displays the number of BGP path attributes and the amount
of memory used to process them.
Displays the number of BGP AS_PATH attributes processed
and the amount of memory used to process them.
Displays the number of BGP COMMUNITY attributes
processed and the amount of memory used to process
them. The show ip bgp ipv6 unicast community
command provides more details on the COMMUNITY
attributes.
Displayed only when dampening is enabled. Displays the
number of paths designated as history, dampened, or
penalized.
Displays the BGP neighbor address.
— assigns a peer to a peer-group.
— creates a peer group.
783